The wall holder for knives is one of those products that is simple enough, if not elementary simply, you can do at home, as they say, without straining. The only thing that is required here is to acquire powerful neodymium magnets of any shape – the configuration of the role does not play.
Their thickness is important – optimally this size is from 3 to 5mm, because they can be embedded in a body of various thicknesses. Among other things, you will need a body, which, again, can be made from almost any improvised material – optimally it is wood, but if someone has a fatty (up to one centimeter) textolite or plastic in the household, then it will also fit. Suitable even for aluminum floors, but it should be understood that the knives on it will leave scratches, and after a short period of time such a holder will have to be thrown away or altered.
And if we talk about the technology of independent production of magnetic wall rails, everything is quite simple here, and we can present this process in the form of the next stage of work.
First, we prepare the rail, which will act as the body of the holder. For example, consider wood – we give it the right shape, polish it almost to a shine with the help of a special disk. From the back side we choose seats for magnets – in this respect, it is better to give preference to round washers-magnets, since holes for them are simply drilled with a fret cutter or a drill for furniture. The holes must be drilled in two rows, so that the knife can be held over a large area.
Further we paste the magnets into these holes – any one that is more or less suitable for joining wood to metal can be used. The best option would be liquid nails or similar glue. In principle, you can not glue the magnets at all, but fix them all at once with a thin plastic overlay – then you have to decide and proceed from the available materials.
And further all is simple – we fasten the ready rejku in the most convenient place of kitchen and we use in the blessing and pleasure.
It should be noted that this is not the only way to solve the problem of how to make a magnetic knife holder yourself – as mentioned above, almost any material can be used for this purpose. The most important thing here is your creative imagination, which you will have to show if you want to make the holder not the same as everyone else.